weld

vt.& vi.焊接；使紧密结合

n.焊接点；黄色植物染料

verb

1. 焊接；熔接；锻接
   to join pieces of metal together by heating their edges and pressing them together
   1. to weld a broken axle
      焊接一条断裂的轴
   2. The car has had a new wing welded on.
      这辆汽车焊上了一块新挡泥板。
   3. All the parts of the sculpture have to be welded together.
      这件雕塑所有的部件都必须焊接在一起。
2. 使紧密结合；使连成整体
   to unite people or things into a strong and effective group
   1. They had welded a bunch of untrained recruits into an efficient fighting force.
      他们把一群未经训练的新兵组织成了一支有战斗力的部队。
   2. The crisis helped to weld the party together.
      这场危机促使整个党紧密地团结在一起。

noun

1. 焊接点；焊接处
   a joint made by welding

vt. 焊接；使结合；使成整体 vi. 焊牢 n. 焊接；焊接点 n. (Weld)人名；(英)韦尔德

过去分词:welded 过去式:welded 现在分词:welding 名词复数形式:welds 第三人称单数:welds

weld 焊接

来自well拼写变体，泉水，涌出，沸腾。该词用于指焊接。

1. It's possible to weld stainless steel to ordinary steel
   不锈钢是有可能和普通钢焊接在一起的。
2. They will also be used on factory floors to weld things together
   它们也可用于工厂车间，用来焊接物体。
3. Where did you learn to weld?
   你在哪儿学会的焊接技术？
4. She has both the authority and the personality to weld the party together
   团结全党所需的权威和个人魅力她两者兼具。
5. The miracle was that Rose had welded them into a team.
   令人称叹的是罗斯把他们打造成了一个团队。
6. Can you spot weld a tube to a sheet metal?
   你能把一个钢管点焊到钢板上吗？
7. The varied weld penetration depths of austenic stainless steel in A-TIG welding are studied.
   采用活性化焊剂TIG焊接方法研究了奥氏体不锈钢焊缝熔深的变化。
8. Fracture toughness of heat-affected zone ( HAZ) was between the base metal and weld metal.
   焊接热影响区的断裂韧性介于母材和焊缝金属之间。
9. Welding in closing cross memberapply a full weld to the closing cross member in area and using shielding gas.
   焊接封闭横梁使用保护气体在区域和内满焊封闭横梁。
10. The microstructure and fine structure of weld fusion zone for high strength fine grain steel were studied.
    研究了高强度细晶粒碳素钢焊接接头熔合区附近的显微组织及精细结构。
11. The deposited ferritic weld metal shall not contact the austenitic or high-chromium steel cladding.
    熔敷的铁素体焊缝金属不应与奥氏体或高铬钢复层接触。
12. The corrosion behavior of austenite stainless steel weld joint in the different acidic medium was studied.
    研究了奥氏体不锈钢焊接接头在不同酸性介质中的腐蚀行为。
13. NDT is the primary method to check the structures and weld joints.
    无损探伤是对结构和焊接接头进行检验的主要手段。
14. The properties in weld deposit metal and Heat Affected Zone are strictly homogeneous with the base metal.
    在焊接性能和热影响区金属矿床严格均匀与金属基材。
15. They weld the pieces of a broken axle.
    他们焊接断了的车轴。
16. It takes speed and skill to weld steel at this heat.
    在这样的温度下焊钢需要速度和技术。
17. And the weld width decrease with welding speed being increased.
    而焊接速度的增大，焊缝正面和背面的熔宽明显减小。
18. A computer-aided system for testing and analyzing weld thermal cycle is presented in this paper.
    本文研究设计了一种焊接热循环参数测试及分析系统。
19. The welding methods, heat-affected zone, and design method of weld strength are introduced.
    文中介绍铝合金的焊接方法、接热影响区以及焊接强度的设计方法。
20. The temperature field and residual stress field of unclosed hoop weld were obtained and the results were discussed.
    获得了非封闭环焊缝焊接温度场和残余应力场，并对模拟结果进行了分析。
21. The influences of welding parameters on the weld appearance of friction stir welding of LY12 aluminum alloy were researched.
    研究了搅拌摩擦焊工艺参数对LY12铝合金焊缝形貌的影响。
22. Apply a full weld to the closing cross member in areas and using shielding gas.
    用保护气体在区域和中对封闭横梁实施全焊。
23. The distribution of residual stress of weld joints is analyzed.
    并分析了焊接接头残余应力的分布规律。
24. Blind area in the inspection of butt weld joints using TOED technique was studied by theoretical analysis and experiment.
    理论分析与试验验证相结合，研究分析了TOFD技术在检测对接焊接接头中的盲区。
25. The welding time and weld quality is guaranteed by international purchased welder.
    采用国外引进焊机确保钢带焊接时间和焊接质量。
26. By the analysis and measures above, it improves the test quality of the process piping butt weld effectively.
    通过以上分析和采取的措施，能有效提高工艺管道对接焊缝超声波检测的质量。
27. Aimed at spirally welded steel pipe, a visual sensor for automatic weld seam tracking system is developed.
    针对螺旋埋弧焊钢管外焊，研制了一种基于视觉传感的焊缝自动跟踪系统。
28. Electrode and rod diameters shall conform to the parameters of the weld procedure.
    焊条和焊棒直径应符合焊接工艺参数。
29. This paper investigated the hydrogen effects on facture toughness in the fusion area of stainless steel weld overlay.
    研究了氢对不锈钢堆焊层熔合区的断裂韧性的影响作用。