centrifugal

adj.离心的

adj.

1. 离心的
   moving or tending to move away from a centre

adj. [力] 离心的；远中的 n. 离心机；转筒

1. The juice is extracted by centrifugal force.
   果汁是通过离心力榨取的。
2. Centrifugal machines are connected to the motor drive directly instead of through a gearbox.
   离心机不通过调速箱直接与电机驱动装置相连。
3. Centrifugal pump performance curve can be used as the basis for pump selection.
   离心泵的性能曲线可作为选择泵的依据。
4. We are held fast to the ground not by gravity, but by centrifugal force as the Earth rotates.
   我们被牢固地固定在地上不是引力而是如地球旋转的离心力。
5. Double-volute is an important case form employed to balance radial thrust caused by centrifugal impellers under off-design operating conditions.
   双蜗壳作为一种用以平衡离心叶轮在非设计工况下运行时产生的径向力的压水室形式，阐述了其重要性；
6. Centrifugal process was reviewed by speed and time.
   以转速和时间为主要因素考察离心工艺。
7. Centripetal force and tangential force or centrifugal force and tangential force could be used as a strain analysis method.
   用向心力和切向力或离心力和切向力进行胁变分析是可行的。
8. Meanwhile, a measure is taken to reduce the action of centrifugal force.
   同时提出了减小离心力作用的方法。
9. A centrifugal pump with special speed of84.8 was optimized with the method.
   采用该方法对一比转数为84.8的离心泵进行优化。
10. Analyses the effects of variable condenser water flow on COP of centrifugal chillers.
    分析了冷却水变流量对离心式制冷机性能系数的影响；
11. Flow Loss for the Radial Suction Chamber of Centrifugal Compressor Improved Design
    离心压缩机径向吸气室的流动损失分析和改进设计
12. Centrifugal and mixed flow pumps pressurized water chamber is a common spiral-shaped, called the volute.
    离心泵和混流泵常见的压水室是螺旋形的，称为涡壳。
13. This structure with the abolition of the traditional centrifugal rotary shaft sealing device it can do no leakage.
    这种结构取消了传统离心泵具有的旋转轴密封装置，故能做到完全无泄漏。
14. This paper has discussed the problems related to flow incidence angle in centrifugal fan.
    对与离心式通风机的气流冲角等相关度问题进行了探讨。
15. Basic type centrifugal clutch has improved the startup efficiency of start motors.
    基本型离心式离合器，提高了效率，启动马达启动。
16. Semi-steel's speciality and market information of ductile iron pipe and centrifugal pipe casting technique are introduced.
    对副产半钢的特性和球墨铸管的市场、生产工艺进行了分析。
17. Technology of step tongue volute is introduced and applied to a centrifugal fan for discharging lampblack.
    介绍了阶梯蜗舌技术，并将其应用于一种排油烟的离心风机。
18. Many evaporator designs utilize centrifugal force to separate liquid droplets from vapor in cyclone separators.
    许多蒸发器利用旋风分离器的离心力使液滴从蒸汽中分离出。
19. This paper focuses on the application of method of controlled circulation in the quasi three dimensional design process of centrifugal impeller.
    对控制环量方法在离心叶轮准三元设计中的应用展开了研究。
20. In the end, centrifugal compressor operation and control in practice running has been introduced.
    最后介绍了离心压缩机在实际运行中的操作及控制。
21. This series contains robust abrasion-proof horizontal or vertical multistage centrifugal pumps with closed radial impellers.
    这一系列包括带有闭合径向叶轮的耐磨损水平或竖直多级离心泵。
22. YHB series chemical submersible pump is vertical single-stage single-suction centrifugal pump.
    YHB系列化工液下泵是立式单级单吸离心泵。
23. The Performance prediction of centrifugal compressor takes a very important role in its research and application.
    离心压缩机性能预测在其研究和应用中有着十分重要的作用。
24. We are looking for low pressure centrifugal pumps.
    我们正在寻找低压离心泵。
25. Dynamic behavior of centrifugal flywheel governor system subjected to external disturbance was studied.
    研究了一类受外部扰动的离心调速器系统的动力学行为。
26. The calculated flow field of the centrifugal impeller and the improvement of the blade shape are discussed.
    用计算结果分析了叶轮流场品质，提出了改型措施并对改型叶轮流场进行了分析。
27. Using this device, centrifugal model tests are conducted by recording the deformation processes of the slope after excavations.
    利用该设备进行了土坡开挖的离心模型试验，再现并记录了边坡开挖后的变形破坏过程。
28. Speed and the angle of tuyere of Centrifugal fan are main factors for Combine sieve surface airflow distribution.
    离心风机的转速及其出风口角度是影响联合收割机筛面气流场分布的两个主要因素。
29. High speed centrifugal compressors have been increasingly used in small aero-engines and gas turbine industries.
    高压比离心压缩机正在喷气发动机和燃机中得到越来越多的应用。